
Formula 1’s 2026 technical regulations offer a useful lesson for electric vehicle owners: electrification does not make the rest of the vehicle less important. It makes every efficiency decision more important.
The new Formula 1 power units still use a 1.6-liter turbocharged V-6 engine, so Formula 1 has not become a fully electric series. However, the electrical contribution has increased from roughly 20 percent to about 50 percent of total power. The MGU-K electric motor now delivers up to 350 kW, compared with 120 kW under the previous regulations.
At the same time, the minimum weight of the cars has been reduced by 30 kg. Pirelli’s 2026 tires are 25 mm narrower at the front and 30 mm narrower at the rear, while the four tires together weigh approximately 1.6 kg less than the previous specification.
A Systems Approach
Formula 1 is adding electrical performance while reducing mass and drag throughout the vehicle. That is the real lesson for road-going EVs: the powertrain, wheels, tires, aerodynamics, suspension, and software must work as one complete system.
Formula E is a separate all-electric championship, not an electric division of Formula 1. Pirelli supplies Formula 1, but it is not the Formula E tire supplier. Hankook supplied Formula E through the 2025/26 GEN3 Evo season, while Bridgestone becomes the championship’s tire supplier with the introduction of GEN4 in the 2026/27 season.
The outgoing Formula E GEN3 Evo car had a minimum weight of 859 kg with the driver, compared with the 2026 Formula 1 minimum of 768 kg. The cars are designed around different regulations and performance objectives, but Formula E shows how quickly electric performance has evolved.
The GEN3 Evo could accelerate from 0 to 60 mph in 1.82 seconds, quicker than a contemporary Formula 1 car during initial acceleration, although its 200 mph top speed remained lower than Formula 1. Formula E cars also produce approximately 80 decibels, making them considerably quieter than combustion-powered race cars. With less engine noise, tire, drivetrain, and aerodynamic noise become more noticeable.
Wheel Weight and Size Affect EVs

A wheel contributes both rotational mass and unsprung mass. Rotational mass must be accelerated every time the vehicle gains speed. Unsprung mass sits below the suspension and influences how effectively the tire remains in contact with the road.
A heavier wheel can affect energy consumption, steering response, braking, and ride quality at the same time. Larger-diameter wheels often add weight and require lower-profile tires. This may sharpen steering response and improve appearance, but it can also reduce ride comfort and efficiency. A wider wheel and tire package may also increase aerodynamic drag and rolling resistance, depending on its design.
Lighter is not automatically better. EV wheels still need sufficient structural strength, load capacity, brake clearance, and durability for vehicles that are often heavier than comparable gasoline models.
Across USAWheels and CanadaWheels, we have sold more than one million wheels and tires. In our experience, one of the most common mistakes EV owners make is selecting wheels primarily by appearance. Moving to a larger or heavier wheel can change more than the vehicle’s styling. It may influence driving range, acceleration, ride comfort, road noise, and tire replacement costs.
The most successful upgrade is not necessarily the largest or lightest option. It is the package that preserves the vehicle’s intended balance while meeting the owner’s priorities.
EV Tires and Proper Fitment

Lower rolling resistance can help preserve driving range, but it cannot come at the expense of wet braking, cornering stability, or load capacity. EV tires must manage battery weight, immediate torque, and regenerative braking forces. Because the electric powertrain is quieter, tread and road noise become more prominent inside the cabin.
The correct tire is not simply the tire with the lowest rolling resistance. It is the tire that appropriately balances efficiency, braking, grip, wear, noise, climate, and the driver’s actual use of the vehicle. Proper fitment is equally important. Across USAWheels and CanadaWheels, our proprietary fitment technology covers more than 50 million vehicle applications. A wheel that physically bolts onto a vehicle is not necessarily a properly fitted wheel.
Correct fitment requires the right wheel width, diameter, bolt pattern, offset, center bore, brake clearance, and load rating. The tire must also have the correct size, overall diameter, load index, speed rating, and tire pressure monitoring system compatibility. Even a small change in offset can affect suspension clearance and steering geometry, while a meaningful change in overall tire diameter can influence speedometer accuracy and the information used by traction and stability systems.

Keep This in Mind
Before replacing an EV’s wheels or tires, owners should confirm load ratings, preserve an appropriate overall tire diameter, verify offset and brake clearance, select a tire suited to their climate and driving priorities, and maintain correct tire pressure and vehicle alignment.
Formula 1’s broader lesson is not to chase one specification in isolation. The lightest wheel is not automatically the safest choice, and the tire with the lowest rolling resistance is not automatically the best tire. The strongest EV setup balances fitment, weight, efficiency, grip, braking, comfort, durability, and safety as a complete system.
Saleh Taebi is Founder and CEO of USAWheels and CanadaWheels, automotive e-commerce platforms serving drivers across North America. Their proprietary fitment technology covers more than 50 million vehicle applications, and the platforms have sold more than one million wheels and tires.

